How to Mount and Adjust Split Knee Supports for Your S2 Supine Stander

In this step-by-step guide, we'll show you how to mount and adjust the split knee supports for your stander. Follow these simple instructions to ensure a secure and comfortable fit:

1. Mounting the Supports:
o Remove the mounting knob and bolt.
o Hook the keyhole of the split knee accessory over the knee stud on the lateral side of the leg.
o Click it down onto the stud.
o Slide the mounting bolt through the angle slot and secure the knob.
o Repeat for the opposite leg.

2. Adjusting Depth and Angle:
o To adjust depth, loosen the top knob and slide the assembly forward or back.
o To adjust angle, loosen the mounting knob and tip the support up or down.

3. For Transfers:
o Leave the split knee assembly attached to the leg.
o Use the white trigger to flip the knee support to the side for transfers.
o Flip the support back into position until it locks with a click.

4. For Standing:
o Position the padded hoops above and below the user’s patella.
o Adjust the depth inward until the support holds the user’s leg snugly.
o Ensure all knobs are tight.

Stay Connected:

🔗www.rifton.com
📧 [email protected]
📱 Instagram:   / riftonequipment  
Facebook:   / rifton  
X: https://x.com/Rifton

#Stander #KneeSupports #Accessibility #ProductDemo #HowTo #AdaptiveEquipment