Скачать или смотреть How to Make A Touch-Sensitive LED Smart Table? - Full DIY Process

Here is the complete DIY process of this epoxy resin touch-sensitive LED smart table.

1. Cut out hexagons on a CNC machine
Download the CNC file:
https://spetools.com/products/led-mod...

2. Polish the edges of the hexagons to remove the burrs

3. Pour epoxy resin into the grooves

4. Flatten the top and bottom surfaces of the board
Router Sled: SpeTool Cratos
https://spetools.com/collections/rout...
Router Bit: SpeTool ATS coated surfacing router bit (W05002)
https://spetools.com/products/spetool...

5. Cut out circle grooves for placing LED modules
Router Bit: SpeTool down cut spiral router bit (W04004)
https://spetools.com/products/spetool...

6. Polish the surface of the table

7. Cut off excess wood on all sides of the board

8. Get the LED modules prepared
LED Modules: https://spetools.com/products/led-mod...

9. Place the LED modules into the circle grooves and connect them together

10. Fix them in place with hot glue

11. Join the LED table with the base together

12. Flush trim the 4 edges of the table
Router Bit: SpeTool Ranger flush trim router bit (W07037)
Speed: 10000 RPM
Ranger Series: https://spetools.com/collections/rang...

13. Chamfer the edge with a round-over router bit
Router Bit: SpeTool round-over router bit (W07028)
https://spetools.com/collections/spet...

14. Apply a clear coat on the surface of the tabletop

15. Fix the table legs

Done!

For any questions about this process, feel free to leave your comment below!

Updated:
Things to note when making this table: https://www.instagram.com/p/C2h_OQ1NV...