LED Saddlebag Run / Brake / Turn Signals Install from HOGWORKZ® ('14+ Harley® Touring Models)

HOGWORKZ® LED saddlebag lights are extremely bright, as well as plug and play for any '14-later Harley Davidson touring models equipped with hard saddlebags. These saddlebag LED lights will work with standard or stretched bags, both HOGWORKZ® as well as OEM. Install is a breeze, and as with all HOGWORKZ® LED products, are backed by a lifetime warranty!

BUY NOW!
CHROME W/SMOKED LENS: https://hogworkz.com/led-saddlebag-li...
SKU: HW307103

BLACK W/SMOKED LENS: https://hogworkz.com/harley-led-saddl...
SKU: HW307104

0:00 Intro
0:45 Remove your seat, side cover & saddlebag
0:57 Disconnect the OEM wiring harness & pig-tail in the new harness for the saddle bag lights
1:11 Make sure you’re connecting the new wire harness to to the rear wire harness on your bike
1:18 Plugin in the rear saddlebag light, double check you’re on the correct side
1:24 Run a clean line down the frame using zip ties, leaving enough slack to mount the saddle bag light to the back of the bag
1:36 Zip tie any extra slack before installing the saddle bag light to the saddle bag
1:42 Reinstall your side cover before installing you saddlebag
1:48 Reinstall your saddle bag and affix the LED light
1:52 Make sure you surface is clean before attaching the LED light
2:00 Press firmly on the light to make sure its properly adhered to the bag
2:09 Repeat the previous steps on the other side and reinstall your seat


Important Features:
• Smoked Lens
• Contoured to seamlessly mate up with the curve of hard saddlebags
• Installs using ultra strong 3M adhesive tape
• Extremely bright LEDs act as run, brake & turn signals!
• Lifetime Warranty!
• Allows for removal of Tour Pack with detachable mount kit, and supplements Tour Pack mounted rear lighting.
• Sold in pairs (left/right)
Fitment:
'14-later FLHT, FLHX, FLHXS, FLTRX, and FLTRXS models (except Canadian models)

#saddlebags #harleyturnsignals #bagger