Скачать или смотреть E&C Complete Gearbox QD V2 Rear

E&C entry level complete gearbox. Even though standard parts compression is excellent straight out of the box. Upon inspection the gearbox was shimmed and greased although I advise running the gearbox for a short while and then re-shim and re-grease. FPS on 0.2g averaged around 410. Uses a standard trigger switch block, once fitted into a lower receiver the rear cable extends around 9".

Features
Steel spring guide with bearing
Linear spring 410 fps
T9 screws
15 tooth full steel racked piston
3/4 brass cylinder
Plastic nozzle (no o-ring)
Plastic cylinder with flat pad bottom
Plastic piston
Standard machined 18:1 gears (10 point bevel)
Tamiya connector
8mm bearings