Making a Silicone Mold for the First Time! | Setting up my ARBE Wax Injector | Jewelry Making

Making a silicone mold for the first time was MESSY! lol BUT, I learned a lot! After making both silicone molds, I think the take aways were:
1. connect your piece with sticky wax first
2. mix 80g part A and 8g part B
3. have a scale handy that can weigh out something as light as 8g lol...
4. use a container that has a spout to mix in
5. use a spatula & wear gloves.

We also set up the ARBE Wax injector that works like a charm! I have linked in my amazon storefront all of the attachments you will need to set up your ARBE. In my storefront link there is a hose attachment kit as well as one lonely little quick connect brass fitting, you will need both.

I hope you enjoyed this video and that you either learned from my mistakes or were at least entertained lol.

Please subscribe if you enjoy these videos and follow me on socials below for more behind the scenes content:

Instagram: https://instagram.com/miteramade?igsh...

TikTok: https://www.tiktok.com/@miteramade?is.

WEBSITE https://miteramade.com/

Amazon Storefront: https://www.amazon.com/shop/miteramad...

Amazon Storefront for Silicone Making and Wax Injecting:
https://www.amazon.com/shop/miteramad...

Amazon Storefront for Casting Equipment: https://www.amazon.com/shop/miteramad...


Kaya Cast Vacuum Table:

https://pepetools.com/collections/fur...

Amazon Storefront for Wax Carving Tools: https://www.amazon.com/shop/miteramad...

Silicon Mold From Rio Grande:
https://www.riogrande.com/product/akr...

Mold Frames from Rio Grande:
https://www.riogrande.com/product/cas...