How to change oil on a 2013-16 kawasaki ZX6R (636)

Sorry about the audio, just crank up the volume!
This is a tutorial video on how to change the oil on the 2013 Kawasaki ZX6R (636) (2014-2017 is the same) Capacity and torque specs below

**REMEMBER TO CHECK YOUR OIL LEVEL AFTER YOU START THE BIKE WITH THE NEW FILTER AND OIL**

This is a tutorial only and should be treated more like a guide. I will not be held responsible in the event you misunderstand what is shown. If at any time you don't understand what your doing or what to do. CONSULT YOUR OWNER MANUAL OR PAY A DEALER TO DO YOUR SERVICE WORK. That being said, have a nice day.

Oil filter torque spec is 13 ft lbs
Oil drain bolt torque spec is 21 ft lbs
Oil Capacity is 3.3 qts of 10-40

*TOOLS*

Oil filter socket 65mm
http://www.motorcycle-superstore.com/...
6" 3/8 extension
3/8 drive ratchet
3/8 drive torque wrench
17mm socket 3/8 drive
oil filter drain funnel (custom made)
Oil drain pan
Oil funnel
rags

** A bit of good info from another biker for you if you so decide to read this far**
Engine oil Capacity is as follows
3.6L is with a completely dry engine as if you had dismantled it and rebuilt it. 2.8L if you didn't remove the filter and 3.1 if you did remove the filter.