Скачать или смотреть This 3D Printed Diving Torch Costs Just $10 To Make

In today's video, I'm excited to guide you through building a DIY underwater torch using affordable and easily accessible components. This torch isn't just functional; it's also a testament to durable design, having been tested down to 30 meters in Polish lakes. Design is 8 years old, so I would probably do it slightly different today :)

Here's what you'll need to build your own underwater torch:

LED Flashlight Module: $4.00
Watch Glass: $0.753
O-Rings: $0.30
Aluminum Pipe (ID 7mm, OD 8mm): $0.50
Battery Li-Ion 18650: $3.00
PLA Filament (100g for 3D printed parts): $1.40
Total Cost: $9.95 (Prices are per item and do not include shipping, but it's still possible to build this torch for under $10.)

In this tutorial, I'll take you step-by-step through the process of assembling the torch, showing how each component fits together to create a robust device capable of withstanding deep water pressures. We'll start by assembling the 3D printed parts, then move on to integrating the LED module and sealing it with O-rings, followed by setting up the power source using a simple yet effective setup with a battery and a piece of aluminum tube.

Whether you're a diving enthusiast looking to tinker with gear or a DIY hobbyist interested in creating practical, cost-effective solutions, this project is for you.

If I cross 1000 subs I will refresh the design and make it public, so please subscribe :)

Feel free to ask questions, leave comments, or provide feedback in the comments section below. Happy tinkering!

Happy Diving and DIYing!

If you like it feel free to buy me a coffee! ☕ 👉 https://buymeacoffee.com/taboretum

#DIYUnderwaterTorch #3DPrinting #UnderwaterTech