mercedes cls 550 Front brake pads (e 550 brakes too)

replacing oem brake pads with stop tech pads. Will add links later. This is a how-to for w218 & w212 with 4.7 engine BITURBO engine(may also be same for sl 550 with same engine)


things needed

*brake pads & new hardware
-Fronts https://www.rockauto.com/en/moreinfo....
-rears https://www.rockauto.com/en/moreinfo....

*8mm for brake sensor
*punch tool(small Phillips can work, too) for retainer pins
*flat head screwdriver to contract pistons, then use old pads to even out pistons
*pliers to remove pads
*hammer for retainer pins
*brake cleaner optional
* Brake lube highly recommended not required

-once the wheels are off, this should be 30 min job per side(if that)

-have brake fluid cap off of reservoir