Скачать или смотреть RiParameter | Wide Area & Corridor Mapping | BAAM.Tips

In this BAAM.Tip learn how to use RiParameter to set up mission parameters for your wide area and corridor mapping projects. This workflow is helpful for setting project parameters for the AISPECO Pod and other aerial Lidar units. Let's get into it!

Steps in this video:
1. Choose your scanner type from the dropdown
2. Corridor Mapping as the Project Type
3. Set the corridor width to 304.8 meters
4. Set the point density to 30 points per square meter minimum
5. Set the minimum flying height to 500 ft AGL
6. For this project, ensure the visibility is set to 40km Very Clear
7. And press the play button to view the results
8. Then, change the project type to interactive to further modify parameters
9. Click the Load Results of Corridor Mapping button
10. Click the AVG point density button in the Find Scan Rate for Uniform Point Pattern box
11. And press the play button again.

💬 Join the conversation: baam.tech
❓ Have questions? Contact us at [email protected]

#riegl #riparameter #baamtips #baamtech #geospatial #lidar #lidarprocessing