Induction brass annealer build information

Thought I'd share how this DIY Arduino operated induction brass anneal is put together. I forgot to include the LCD display connections, but there are plenty of videos on LCD based on the I2 communication protocol. The box size was incorrectly stated as 9x9x13, it should be 9 (H) x 13 (wide) x 14.75 (Depth).
Buttons: https://www.amazon.com/gp/product/B07...
Proximity Sensor: https://www.amazon.com/gp/product/B00...
LCD: https://www.amazon.com/gp/product/B07...
Copper Tube: https://www.amazon.com/gp/product/B07...
ZVS Induction Heater: https://www.amazon.com/gp/product/B07...
Optical Isolator Chip: https://www.amazon.com/gp/product/B01...
Heat Exchanger: https://www.amazon.com/gp/product/B08...
Arduino: https://www.amazon.com/gp/product/B01...
ZVS Power Relay: https://www.amazon.com/gp/product/B07...
Buck Converter: https://www.amazon.com/gp/product/B08...
Water Pump: https://www.amazon.com/gp/product/B07...
Terminal Strip: https://www.amazon.com/gp/product/B00...
Mosfet for Solenoid: https://www.ebay.com/itm/10pcs-FQP30N...
Solenoid: Salvaged from a printer, but anything with 3/8"-1/2" travel should be good.
Arduino Code: https://drive.google.com/file/d/1rlWB...
Incomplete Sketchup model: https://drive.google.com/file/d/1SIMD...
Case holder exploded view: https://drive.google.com/file/d/15yRZ...