Wood Core Rudder Part 4

Описание к видео Wood Core Rudder Part 4

This video shows how I went about actually milling the 95 Lb. white oak blank. Using the offset jig as a sled I used a large router with a 2" diameter bit taking many passes up and down the blank. Depth of cut was never more than 1/8" and for each pass I moved the router about 1/2" on the sled. Final weight of the blank before glass was under 70 Lbs., compared to the soggy old OEM rudder that is much smaller at 75 Lbs.

Комментарии

Информация по комментариям в разработке

Похожие видео