How to Replace Crankshaft Position Sensor 2007-2012 Nissan Versa

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com http://1aau.to/ia/1AECS00122

This video shows you how to install a new crankshaft position sensor from TRQ on your 2007-2012 Nissan Versa. The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.

This process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa

Tools you will need:
• 10mm Socket http://1aau.to/obfm/1AXAA00017
• 8mm Socket http://1aau.to/obfm/1AXAA00017
• Trim Tool Set http://1aau.to/oaeF/1AXXX00006
• Socket Extensions http://1aau.to/obzz/1AXAA00015
• Torque Wrench http://1aau.to/oaIN/1AXAA00044
• Gloves http://1aau.to/oaeL/1AXSS00048
• Safety Glasses http://1aau.to/o7H/1AXAA00343
• Floor Jack http://1aau.to/o8u/1AXAA00068
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.