Powering a High Power LED (and not melting everything) - DIYson Lamp Build Log #4

Welcome back to the DIYson build log where I recreate an expensive Dyson light using off-the-shelf and 3D printed components. This time I'm adding a pretty critical component to the DIYson: the light source! This required more trial and error than I expected, but I'm pretty happy with the result. Enjoy!

Current project files repository: https://github.com/stevenbennett/DIYson

Parts mentioned in this video (just the ones I ended up using):
LED: Lumileds: https://www.mouser.com/ProductDetail/...
LED Power Supply: https://www.mouser.com/ProductDetail/...
LED Mount: https://www.mouser.com/ProductDetail/...
Lens: https://www.mouser.com/ProductDetail/...
Heatpipe: https://www.mouser.com/ProductDetail/...
Adafruit Trinket M0 (Microcontroller): https://www.adafruit.com/product/3500
Tactile Switch Buttons: https://www.adafruit.com/product/1119
Low Profile Screw: https://www.mcmaster.com/97710A129/

My favorite filament: https://amzn.to/3j5RVws

Subscribe to the channel:    / @stevenbennettmakes  

#3dprinting #diy #maker #design