Toyota Soarer JZZ30 1.5JZ with BorgWarner S362SXE drive out

This is one of the last videos I got with the borgwarner on the car- it now has the Garret GTX3071R fitted that I mentioned previously! videos to come soon with noewer/better gopro hero 6!

Unfortunately conditions weren't ideal on this venture out, but made for some interesting and edgy driving under acceleration. 3rd and 4th would spin up as tge boost and torque hit- so was understandably careful with it all!

Enjoy! :)

leave any comments or feedback below, i always try to get back to people when i can!

Engine: 1.5jz build around 450bhp and 500ft/lbs of torque

-2jzGE bottom end fully rebuilt with all new bearings and seals.
--Block washed.
--1jz Head skimmed washed.
--New valve guides.
--Stem seals.
--Shimless buckets.
--Cometic 2.3mm head gasket
--New water pump.
--New oil pump.
--Deatschwerks dw200 fuel pump Fuel filter changed 3 yrs ago
--Borg Warner s362sxe
--Funk motorsport heat shields
--Tonnka manifold from Aus.
--Stainless system 3" turbo back Stainless screamer
--45mm Turbosmart latest gen wastegate 550cc injectors with ballast ---------Intake Heat Sheild *PKD Slam Panel Shield *K&N 8″ Induction Cone & Hard pipe
--Mishimoto intercooler
--Mishimoto X spec Supra uprated aluminium radiator
--Link Storm ECU mapped my Tom at Fensport
--Carbon coil pack cover
--Clear pulley cover Chassis & Drivetrain

Transmission and Running Gear
--R154 converted
--Xtreme clutch R154 fly was ground flat before install
--New clutch master cylinder
--PKD BMC Stopper
--Cusco carbon strut brace
--A01B Limited Slip Diff
--HSD coilovers (medium hardness)
--Crimson,Inc Linea L450 alloy wheels – 19×9 et16 and 19×10 et23 Uniroyal Rainsport 3’s all round – 235/35r19 front and 25/35r19 rear
--LS400 Front callipers and custom calliper spacers to fit 360mm ISF discs --EBC Red stuff pads front and rear Red braided brake lines

Enjoy, There will be more coming soon! :)