2019 Subaru Forester CVT Fluid Replacement and ADF Pan Upgrade

Drain and Fill of CVT Transmission Fluid
Installation of new Anderson Design Fabrication CVT Transmission Pan

Resources that helped me with this job:
@MrSubaru1387
@MTsubfly
@abcdeinformation3048
Subaru Forester Factory Service Manual

Materials:
-CVT FLuid: Subaru CVTF-II
-CVT Fill Plug Gasket
-ADF Transmission Pan (bolts, drain plug+washer included)
-Liquid Gasket - Three Bond 1217B or equivalent

Tools/Equipment:
-Jack + Jack Stands
-Drain Pan
-Brake Parks Cleaner
-Fluid Fill Pump
-Torque Wrench
-Socket Wrench
-10mm Socket
-14mm Socket
-8mm Hex
-Transmission Fluid Temperature monitoring device (e.g. ScanGauge II)

Simplified Steps:
1. Remove fill plug, let drain
2. Remove drain plug, let drain
3. Reinstall drain Plug
4. Fill new CVTF-II until it spills out
5. Reinstall fill plug (snug only)
6. Start car, shift through gears
7. Remove fill plug
8. Remove drain plug, let drain
9. Remove pan bolts
10. Remove pan using separator tool
11. Clean area and surfaces thoroughly
12. Apply liquid gasket to pan and replace pan
13. Install pan bolts
14. Fill new CVTF-II until it spills out
15. Reinstall fill plug (snug only)
16. Start car, shift through gears, get CVT temp to 95-113 deg F
17. Top off CVTF-II
18. Replace fill plug and fill plug gasket