Fagci Reborn -2024-Backup-Flash-Enable TX-User Guide- ⚠️Read Description Before Flashing⚠️UVK6

#quansheng #uvk5 #tutorial
If you plan on going back to ⚠️egzumer ⚠️ then don't flash/use this firmware⚠️It works ok with ijv but when trying to revert back to egzumer it is a different story read the full description!!!
So this firmware is still very much in its development stage!!!⚠️Flash it at your own risk!⚠️So I did revert back to IJV as a test and all was ok after trying it but reading a comment on here about trying it with egzumer made me test this and I can confirm it is a nightmare to get it working again properly⚠️ I had a few problems, a constant flashing screen then no TX!! However, after a few hours of trying different things, I did manage to finally flash egzumer back & sort out the TX issue thanks to a previous EEPROM backup from ijv not from egzumer!, for this reason, I would not recommend you flash it & try it yourself right now...

⭐To download this package-Firmware, Programmer & Cable driver join up to the TJ-RC-UK Website Bulletin Board⭐ Link: https://tjrcuk.serv00.net

⬇Links to where I purchased my radio & programming cable from...⬇
⬇Qhansheng UV K6 radio⬇
https://s.click.aliexpress.com/e/_DEg...
⬇Programming cable for the UV K6⬇
https://s.click.aliexpress.com/e/_Dnr...


00:00 Cable comms port checking, setup + radio eeprom backup...
01:36 How to put the radio into firmware mode & flash firmware...
03:01 Setup backlight brightness & time out to on...
03:52 Going through the main settings menu...
05:30 Doing an eeprom reset... only do this if the firmware is not working correctly...
05:50 Going through the run app menu...
07:40 Enable TX PMR...
08:31 VFO single screen user guide...
12:48 VFO pro extended screen user guide...
15:20 VFO dual channel user guide...
17:40 VFO dual channel change modulation by using the keypad...
18:07 VFO dual channel looking at how to save & delete channels RX filter setup etc ...
19:50 How to use spectrum band...
22:24 Talking about the Spectrum analyzer...