Скачать или смотреть Wire wrap Earrings tutorial 'Quinn'.

Hello and welcome to my latest tutorial.

Limited time only, 50% OFF ALL WRITTEN TUTORIALS over on Etsy, so go and check it out and I'll see you there :)
https://www.kellyjonesjewellery.etsy.com


To make these earrings you will need -
• 0.7mm wire (21g), 6 x 9" (23cm)
• 0.315mm weaving wire (28g) 100cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• 2 x small cabochons, mine are 15mm by 8mm (you can use a different size, just remember to adjust wire length and weave repeats accordingly)
• small beads, I've used 4 x 2.5mm and 2 x 3mm
• Jump rings, 8mm outside measurement (or whatever size you have handy)
• 2 x ear wires

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

My Etsy shop - https://www.etsy.com/uk/shop/KellyJon...
Facebook -   / kellyjjewellery  
IG - kellyjjewellery

Thanks for watching x

Music is free from youtube;
Invisible Beauty - Aakask Gandhi