BDT How To Install CTS 50 Durometer Mounts on The Audi S4 B8.5

Happy Wednesday BDT Crew!

We are back at it again with another B8.5 s4 Install.

This time we are throwing in some CTS 50 Durometer Motor Mounts!

After installing the ECS Exhaust and test pipes, I've been experiencing major vibration issues.

I'm hoping to solve part of this issue by securing the engine, while also preparing for the amount of power we will be producing with the upcoming performance programming.

Stay tuned for a P3 gauge install and an update on the Upgraded exhaust setup!

As always let us know what you think of the video or if you have any questions, and don't for get to Like and Subscribe!

Thanks for watching!

_____________________________________________________________________________________

This Tutorial is provided as a courtesy by Boost Dynamic Tuning

Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (Including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise safety.

Although this material has been prepared with the intent to provide reliable information, no warranty (Express or implied) is made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this material.

SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL.

In no event will Boost Dynamic Tuning, LLC or its affiliates be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.