2 Way passive Crossover Network || 12 dB per octave

This video is for showing easy method of making a 2 way Crossover network of 12 dB per octave slope. The cross over frequency is at 3000 Hz. The component values are calculated accordingly.

For making the inductor coils small plastic bobbins are available in the market. If the bobbin is not found, the coil can be wound on a ½ inch x 1 inch pipe. Ferrite cores are better for inductor coils. If not available, small pcs of soft iron cores can be used as shown in the video.

For commercial models, components can be mounted on a small PCB.

For 3 way 6 dB network you can see my earlier video at    • Crossover network for 3 way Speaker s...  

For Sub woofer filter network you can see    • Passive Cross over network for Sub wo...  

For other videos of my channel you may visit

   / makingloudspeakersbyalokemukherjee  

Key words :

#2 Way Passive Crossover Network ||12 dB per octave
#2wayPassiveCrossoverNetwork12dBperoctave
#How to make 2 Way Crossover Network ||12 dB per octave
#Howtomake2wayCrossoverNetwork12dBperoctave
#Howtomake2Way12dBpassiveCrossoverNetwork
#CrossoverNetwork
#2way12dBCrossoverNetwork
#TwowayNetwork
#2wayCrossover
#CrossoverNetworkforTwowaySpeakerSystem
#2wayNetworkHowtomake
#HowtomakeCrossoverNetwork
#2way12dBpassiveCrossoverNetwork
#2waySecondOrderNetwork