Ender 3 Pro Necessary PRINTABLE MODS, No B.S.

Got a new Ender 3 Pro? Print your necessary mods with no B.S. stuff that is just for show or is old or outdated. Two reasons for printing ALL of these parts. #1 You will really learn where you can find more than what you think you can find, and how and when to use supports and/or a brim for printing. More importantly, you become very familiar with your machine and become adept at eliminating issues that crop up. #2 You will learn how to use thingiverse.com to find and download files for your use. You will learn how to use

Thingiverse: https://www.thingiverse.com/
Ultimaker Cura: https://ultimaker.com/software/ultima...

NOTE: click on the links below. In order to get the file, click on "download all files", then click on all the parts that you need to create the item. The files will most likely be an .STL extension. You can save the file, which I recommend, or just open in Cura. If you save the file, you can then add many files to the print and do all the parts at once. SAVE THIS VIDEO IN YOUR FAVORITES SO YOU CAN FIND THESE LINKS LATER.

Tool Holder Mount: https://www.thingiverse.com/thing:387...

Filiment Spool Mount: https://www.thingiverse.com/thing:320...
Bearings: https://smile.amazon.com/dp/B07R7PR72...

Power Supply Fan Cover: https://www.thingiverse.com/thing:365...

Z Axis Spacer: https://www.thingiverse.com/thing:407...

Lower Filament Roller Guide: https://www.thingiverse.com/thing:468...
Bearings: https://smile.amazon.com/dp/B07R7PR72...

PCB Cover, Nozzle Storage, & Parts Box: https://www.thingiverse.com/thing:457...

PCB LCD Control Knob: https://www.thingiverse.com/thing:489...

Cable Management Chain: https://www.thingiverse.com/thing:376...
NOTE: Two sizes of chain. Print 18 of the smaller links, with one link that has the 80/20 connector. The larger chain, print 19 links, with one link that has the 80/20 connector... you will also have to print the extruder mount. See this video for instructions:    • Creality Ender 3 Cable Chain assembly...  

Hot End Nozzle 360 Cooling Fan Duct: https://www.thingiverse.com/thing:309...
NOTE: This is hard to find! Save this link for 360 degree cooling of your printed filament, no matter what direction the extruder is traveling.

Ribbon Cable Clip: https://www.thingiverse.com/thing:431...

80/20 Slot Cover for Left Side Bottom Rail: https://www.thingiverse.com/thing:464...
NOTE: you will need the 2x104mm and 2x125mm. You will also need to trim one of the back v-slot covers in half, and take out about 5mm of material to accommodate the cable chain 80/20 connector when installed.

Z Axis Threaded Knob: https://www.thingiverse.com/thing:351...

Upper Filament Roller Guild: https://www.thingiverse.com/thing:427...

Extruder Upgrade Replacement: https://smile.amazon.com/dp/B07QHBNYD...
Capricorn Bowden PTFE Tubing: https://smile.amazon.com/dp/B07XXRVGP...
Replacement Rollers: https://smile.amazon.com/dp/B07KXPD6X...
Replacement Open Timing Belts: https://smile.amazon.com/dp/B07FYNPJB...


If you are loving it, support my unique outreach ministry at PayPal. Click https://paypal.me/helicool?locale.x=e...

Want 100% of your donation going to this outreach? Send the Mission a check via snail mail at... I SUPPORT THE GOSPEL MISSION.
Lewis County Gospel Mission
P.O. Box 631
Chehalis, WA 98532
...add in the memo part of the check "LMTV Outreach."
(We use a P.O. Box because of the unsecure nature of having a mailbox.)

OR, specify on the memo where you want the donation spent. (i.e. food, building fund, general fund, etc..) If you do not specify, it goes into the general fund.

If you would like to donate on-line to the Gospel Mission, to find a donate link and our contact information, click https://lewiscountygospelmission.org/...

Helicool's Helipad has merch! WHAT?! Check out my awesome designs at https://teespring.com/stores/helicool...