Assembling 8500rpm "Big Port" Head with SuperTech Valvetrain Components

I'm building a set of 2.8 ATQ cylinder heads with big intake ports to use on my XSPower K04 Stage 3 2.7T motor. In this episode I lap the valves, then assemble the bare 2.8 heads with ATQ cams, APB valves and lifters, and SuperTech valve springs and titanium retainers. Then I install the heads on the motor and torque the head bolts.

2.7T Build Off Challenge Playlist:    • Audi 2.7T Build-Off Series  
Instagram: @pbgaragelive
Facebook:   / pbgaragelive  

0:00 Intro
0:50 Exhaust Valve Differences
3:45 Lapping Valves
8:40 Installing SuperTech kit and valves
13:00 Installing Valve Stem Seals
14:20 Installing Retainers and Keepers
18:00 Lifter Install
19:15 Installing Cams
23:25 Cam Timing Solenoid
24:50 Cam Caps
29:00 Cam Seals and Plug
31:00 Cam Position Sensor Trigger Wheel
32:00 Head Gasket
33:21 Head Bolt Install
34:00 Head Bolt Torque
36:36 Blake's T Type