HP 117A ORIGINAL TONER CHIP REMOVAL

Thank you for watching! In this video, I showed you how to remove the chip from the original HP brand 117A toner. I removed the chips from all four colors and was a bit hasty with the last one since it was the final one I removed, but there’s no problem! The next morning, I installed them all back into the printer and tested them, and they worked perfectly! The only thing was that the printer gave a "low toner" warning since the toners inside were low, but that’s to be expected :) Be careful not to damage the chip while removing it. Thanks again! If you have any questions, don’t forget to mention them in the comments. Lastly, I’d really appreciate it if you subscribe! See you in the next video!
By the way, I apologize for the bad camera angles. I don't have a tripod at the moment, so I had to place the camera somewhere to record :P

WARNING: Be careful while performing this process and make sure not to hurt yourself. I recommend wearing gloves. This way, your hands won't get hurt, and you won't get toner powder on them.

WARNING: If you are under 18 years old and/or have no experience (manual skills), please do not perform this operation! The channel owner is not responsible for any liabilities.