How to build a Spridget Gearbox - Part 1 of 2 (Race or Street)

This is Part 1 of a 2 part series on how to assemble a Spridget Ribcase Gearbox. It will give you all the details you need to properly assembly the rotating assembly (the mains shaft and gear set) that goes inside the gearbox. I’ll show you the tools I use, as well as the detailed methods to handle this tricky assembly. Chapters are below so you can fast forward to any part of the assembly process to get you unstuck if you’re having an problem. Look for Part 2 that will cover all the details you need to install this rotating assembly in the case and complete a fully assembled functioning gearbox. Cheers…and I hope this video helped you!

Chapters:

00:00 Intro
01:20 Rotating Assembly overview
03:50 Step 1 - Installing 2nd Gear on the main shaft and the Tools you will need
15:08 Step 2 - Installing 3rd Gear on the main shaft
20:00 Step 3- The Synchronizer Hubs - Overview
20:44 Step 3A - 3rd/4th Gear Synchronizer Hub Assembly
28:25 Step 3B - 1st/2nd Gear Synchronizer Hub Assembly
35:20 Step 4 - Completing the Rotating Assembly
37:08 - What’s next

Thanks for Watching….and don’t forget to subscribe!