Frontera 2.4i - Custom turn signals, because why not - PART1

Just as the title says 😀🍻 in case you are wondering how much does this all cost, here's a quick rundown of everything needed :

- Isuzu pickup daytime running light housings
About 7€ per side

- LED strips from amazon, with a built in controller for the two purposes it has, mine were about 10€ for both. They were complete external lights, so i had to remove the housings they were glued into

- OPTIONAL LED bulbs and remote controller unit, they are about another 15€, in my case they were free, as i had them from before

- Glue, clear UV-resistant silicone, and other misc. materials are about another 20€, they are free of course if you have them

- PATIENCE, as the only way to reach the inside is from the one and only bulb socket in the middle 😅 believe me, i had my ups and downs with the assembly process 😅😂

oh, and almost forgot, another 16£ for the LED flasher relay that is still on its way from the UK. You'll need a 4 post relay if you have a towing setup. That will solve the hyperflashing what would normally occur with LED lights/bulbs. I found the appropriate ones at a Land Rover specialist in the UK.


That's all, if i missed anything feel free to drop a comment! 🍻