Vinylguard Gloss, Water-Based Polyurethane Vinyl Floor Sealer For LVT Tile, Terrazzo & Rubber Floors

https://www.covertecproducts.com/prod...


How Can I Stop Stripping & Waxing Vinyl And Rubber Floors?

Every day, at least one customer asks us "how do I stop stripping and waxing vinyl and rubber flooring."
Our response is always: "If you want to avoid the pain of stripping and waxing, and you don't have access the heavy burnishing equipment or scrubbers to maintain the floor, our VinylGuard vinyl floor sealer is a good solution.
It's ideal for easily maintaining high traffic areas like:

- A cafeteria floor
- An examination room
- A veterinary floor
- A bank service area
- A daycare center
- A restaurant.

It's just as useful in consumer situations as it is in commercial applications.
Some of our DIY customers use it for longterm protection of vinyl or rubber surfaces in their:

- Kitchen areas
- Basement floors
- Garage floors.

Vinylguard is a 2-part urethane. It's a very durable and tough sealer, developed specifically for sealing and protecting vinyl and rubber flooring.

How Can I Make My Vinyl Floor Shiny Again?

There are a few ways of making vinyl floors shine.
1) You can use a wax on acrylic surfaces and burnish or polish up the floor.
2) You can use an inorganic type of sealer. That is, a solution that hardens the vinyl or rubber, and then you burnish it up.
3) You can use something like our Vinylguard water-based polyurethane vinyl floor sealer.
You simply roll it across the floor surface to apply it.

It dries with a very shiny finish. We also have a matte and satin finishes, as well as a medium gloss.

CoverTec's Vinylguard sealer doesn't need the typical equipment required to apply store-bought sealers.
It doesn't need to be polished and burnished. And, it will dry naturally with a high shine - or whichever finish you prefer.


Do Vinyl Floors Need To Be Sealed?

Vinyl floors must always be sealed.
A vinyl rubber floor is naturally very porous, and the finish can be easily damaged.
Dirt gets easily trapped in this type of surface. Soon thereafter, it can become unhygienic and deteriorate very quickly.
If you fail to seal this type of floor early on, your ongoing cost of maintenance will increase significantly over the short term.
To minimize costs, you need to put a durable seal across the floor as a protective barrier against contaminants of all kinds.

What Is A Vinyl Floor Sealer?

A vinyl floor sealer is a coating you put across the surface to protect it from:
- Regular wear and tear
- Damage
- Contamination from dirt, oils, stains and chemicals.

Ultimately, a good sealer will make it easier to maintain and protect your vinyl surfaces for a long time.

What Is Vinylguard Water-Based Polyurethane Vinyl Floor Sealer?

Vinylguard is a two-part sealer that we use to protect vinyl and rubber flooring.
It's ideal for surfaces like VCT (vinyl composition tile), LVT (luxury vinyl tile), vinyl plank, urethane floors, sport facility floors, etc.
It comes in the following finishes:
- High gloss / Gloss
- Satin (Medium gloss)
- Matte.

It's designed to be used in areas where you don't want the pain (manual labor, time or cost) of stripping and waxing floors.

Our consumer and commercial customers find it most useful when they don't have full-time access to heavy floor maintenance tools like burnishing equipment or polishing and buffing machines.

Typical commercial or retail environments where Vinylguard saves customers massive amounts of time and money are:
- Cafeteria floors
- Health center floors
- Veterinary facility floors
- Restaurant floors (front and back).

Any constant traffic areas where vinyl or rubber surfaces are exposed to ongoing water spills, dirt, pet urine or soiling... Vinylguard can protect the floor for 5 to 10 times longer than off-the-shelf brand sealers.

In the home, it's ideal for use in:
- The kitchen floor
- The basement
- The garage floor.

VCT is very popular for garage floor surfaces, and using Vinylguard is an easy way to protect against chemicals or salts that may drip onto the floor.

Charles Idowu | Technical Director

CoverTec Products,
10857 Northwest 50th Street, Sunrise, FL 33351
5PP4+M3 Sunrise, FL, USA
(754) 223-2465
https://www.covertecproducts.com

  / covertecproducts  
  / covertecproduct  
   / covertecproducts  
  / about  
https://www.google.com/maps/place/Cov...
https://www.slideshare.net/thomasshaf...
https://calendar.google.com/calendar/...
https://docs.google.com/spreadsheets/...
https://drive.google.com/open?id=1mQo...