Faze4 - 3D printed 6 axis robot arm

Official website: https://source-robotics.com
Join our discord community:   / discord  
Check out our forum and ask questions: https://discourse.source-robotics.com

About this robotic arm:
fully open source
6 AXIS with stepper motors and cycloidal gearboxes
reach of 70 cm
weight around 15 kg
cheap - less than 1000 dollars

Support the project on Patreon
  / pcrnjak  

Follow the projects on hackaday: https://hackaday.io/projects/hacker/4...
Follow the project on Instagram:   / source_robotics  
Programs used will be on GitHub: https://github.com/PCrnjak

Hi, so this is a new video of the faze4 robotic arm where i built an electronics holder and fixed some mechanical issues with the arm.
In previous videos, you could see wobble in joint 2 and that is now fixed.

Code used in this video:
https://github.com/PCrnjak/Faze4-Robo...

Building instructions and BOM can be found here (In building instructions PDF)
https://github.com/PCrnjak/Faze4-Robo...

DOCS can be found here:
https://faze4-robotic-arm-docs.readth...

You can contact me on Linkedin:   / petar-crnjak-009b43180  
Or via email: [email protected]