BLADE MSR X TRIMMING

When they say these models are factory trimmed, they are producing loads of these so are put together on a production line.
This means they are all different in the state of trim.
This method roughly trims the model to start with so it should not shoot off in one direction when spooling up the first time.
I then found this method which I have used on the two MSR X models I have !
http://www.rcgroups.com/forums/showth... ( LOOK AT WRITE UP NUMBER 49 )
This model has had some bad reviews, it is not for a beginner as it is lively ! It needs to be control on cyclic and rudder when turning.
Left turns are harder, but you can get it to turn OK.
I have found it needs some forward cyclic to start it moving then some right cyclic and left rudder for a left turn.
Right turns seem a lot easier ! My club mate shot this video of Me flying one of My MSR X`s after trimming.
I hope this might help people who are having trouble, these are Great little Helicopters !!!
   • Pauls MSR X