Скачать или смотреть How To - Light Curing Putty

The `Light Curing Putty` is a one-component putty that doesn`t require any curing agent. It`s easy to apply to all surfaces and does not shrink during curing.


Procedure:

Apply the putty in layers of 2mm thickness, this makes sure the light can penetrate through to the bottom.

The putty will cure in approx. 1 minute under sunlight, or 2 minutes under fluorescent light.

When exposing to fluorescent light, the light should be about 5cm away from the surface.

It will harden slightly softer than usual plastic (polystyrene) parts.

After curing, the putty surface may become slightly greasy.

Wipe the residue off.

Sand it.