Thinkware U3000 Parking Mode

Thinkware U3000 Parking Mode

Parking Mode

(Radar, Smart, Motion & Impact Detection, Time Lapse and Energy Saving Mode)*


New Radar Parking Mode with Built-in Radar
Radar Parking mode is a low-powered recording mode that utilizes the U3000’s built-in radar to monitor motion with minimal power consumption (requires hardwiring or OBD-II cable). This allows for longer buffered parking surveillance so you also have footage of events leading to an incident. When a motion or impact is detected, the U3000 will save a 20-sec video clip (10s before and 10s after the incident has been detected).

Smart Parking Mode
This safety feature prevents heat-related damage by automatically switching the U3000 to a low-power mode if the temperature inside the vehicle gets too high during Parking mode. In this state, the dash cam records incidents triggered by impacts only until its operating temperature is safe again to resume Motion Detection or Timelapse Parking mode.


Motion Detection
Motion Detection Parking mode saves a 20-sec video clip after a motion or impact has been detected (10s before and 10s after the event)


Time Lapse
Time Lapse Parking mode records footage at 2fps, enabling the dash cam to continuously record long periods of parking surveillance without increasing power consumption


Energy Saving 2.0
Energy Saving Parking mode saves a 20-sec video clip only after an impact has been detected (20s immediately after the event), allowing the U3000 to reduce its power consumption and remain in Parking mode for a longer duration


Parking Mode Cable / Low Battery Protection
00:00 Parking Mode U3000
00:16 Radar Parking Mode U3000
00:53 Smart parking Mode U3000
01:22 Motion Detection Parking Mode U3000
01:36 Time Lapse Parking Mode
01:48 Energy Saving Mode
02:10 Low Battery Protection U3000
04:16 Current Draw Thinkware U3000