Sony WH-1000XM4 XM4 Main Wire 14 Pin Plug Clip Replacement Repair Tutorial

Send your device in for repair 👉 https://www.joesge.com/pages/repair-s...

Are you a repair ninja? Buy the parts here 👉 https://www.joesge.com/products/sony-...


Steps to fix your device.
1. Remove the ear pad
2. Remove the four screws that hold the speaker in place
3. Remove the main board
4. Disconnect the main wire
5. Take a photo of the wires then use tweezers to pull one wire out of the connector at a time and install them into the new connector.
6. Mount the new clip in a vice for easier transfer of wires
7. Repeat the process for each wire then compare with your photo to make sure they are all in the right spot.
8. Tug on each wire to make sure they are locked in place
9. Re assemble the headphones
10. Get back to jamming out 🎵


Hello repair ninjas 🥷 As a way to help out with the increasing demand for videos of specific repairs, we have created a membership for our channel that allows you to request 1 custom repair video per month. The video you request will be put at the top of our queue and will be uploaded as quickly as possible. The video can also be started with a shout-out if you would like that. As always, thanks for checking out our repair dojo 🥷
Join Here 👉 https://bit.ly/3rMJJkW

Follow us on our social media for more repair content:
Instagram 📸 -   / joesge  
Facebook -   / joesge  

Feel free to reach out to our support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com 📲
[email protected] 📩
360.362.1722 📞 (Text or Call)