Setup SNMPv3 using the Management Routing Instance (VRF)

In this video, I provide a demonstration of how to set up SNMPv3 to use the management routing instance (mgmt_junos) on Juniper devices.

Opting to use the management routing instance instead of the default for SNMPv3 is a common practice when the objective is to segregate traffic in one routing table from others. This approach ensures that your management traffic remains separate from your production traffic.

For further details and step-by-step guidance on configuring SNMPv3 on Junos, I recommend referring to Juniper's official documentation. You can find more information at the following links:

Configuring SNMPv3 on Junos: https://supportportal.juniper.net/s/a...

Pulling SNMPv3 information from a non-default routing instance in Junos:
https://supportportal.juniper.net/s/a...


Use the timestamps below to skip to the desired part of the video:

Timestamps:
0:00 Objective
1:38 Create the SNMPv3 user (usm)
2:44 Add the SNMPv3 user to a group (vacm)
3:15 Create access rights for the SNMPv3 group
5:38 Create the SNMPv3 view
6:25 Verify SNMP authentication using snmpwalk v3

↤↤ ✿ ↦↦↦↦↦↤↤↤↤↤ ✿ ↦↦↦↦↦↤↤↤↤↤ ✿ ↦↦↦↦↦↤↤↤↤↤ ✿ ↦↦

👍 Like the video (it helps a ton!)
💬 Comment below to share your opinion!
🔗 Share the video with anyone you think it might help :-)

↤↤ ✿ ↦↦↦↦↦↤↤↤↤↤ ✿ ↦↦↦↦↦↤↤↤↤↤ ✿ ↦↦↦↦↦↤↤↤↤↤ ✿ ↦↦

Thanks for watching the video. Subscribe to the channel to get more and press the BELL 🔔 icon to get notified when the next video drops.