CRUZ Airo T roof bars - how to fit

Click here http://www.roofbox.co.uk for more details.

The new CRUZ OptiPLUS roof bar system is superb - it's good looking, strong (the load limit is 75kg, depending on the vehicle), easy to use, and the same roof bar feet are used for almost all cars made since 2005 (excluding cars with raised roof rails).

Chances are that, if you buy into this system, you'll only need to spend £20 (flush rail kits are £25) on a new fitting kit when you change your car.

You need to order two components:
(1) a pair of steel or aluminium bars and
(2) a vehicle specific fitting kit to join the bars to the roof.

The CRUZ standard size 32mm x 22mm plastic-covered rustproofed steel bars and the fitting kit have been pre-ticked in the list below.

CRUZ Airo aluminium bars option: CRUZ Airo low noise, low drag aerofoil-shaped aluminium bars are available as an option:

To our knowledge these are the only low noise bars available in this price range. Aerofoil shaped roof bars were developed by Whispbar and are now also used by Thule, increasingly by Atera, and now also by CRUZ!

The reduced drag means that fuel consumption will also be lower
80mm wide x 28mm deep.

The T-track adapters used in the slots in the tops of the bars are the standard 20mm x 20mm ones - all the products we sell use this size.

There are black rubber strips to push back into the T-track slots when there's nothing fitted to them.

These fully anodized bars even have aluminium coloured rubber infill for the slot in the bottom of the bar - a really nice touch!

Click here http://www.roofbox.co.uk and enter your car details to see if these bars are compatible.