KEDIERS PC Case H590 Build

Hello there today I will be building in the KEDIERS PC Case H590 which is a pillarless case with a 270° full view with a hinged tempered glass side panel and it comes with 9 ARGB fans pre-installed.

I came across some challenges building a vertical GPU a Quite beefy one along with a tower style air cooler. If you choose AIO cooler things can go much easier for you tho haha.

I had to switch the bottom fans for the slimmest ones I could find so that the GPU could fit in and it barely did hahah.

Again, you could save some of the hustle choosing an AIO but I really like that massive tower cooler.

I did some mod to secure an extra fan down at the back of the PCIe slots for extra exhaust.

Plus, I switched the bottom and side fans as intake and the back and top as exhaust.

As you can see under the GPU vertical mount bracket , I put a small hard plastic tube between the fans, since the bracket sits of top of the fans it end up pushing the fan blades down so I did that to prevent the bracket to press on the middle of the fan so now it sits on the edge of the two fans keeping the blades from being pushed down.

Cable management wise there’s plenty of room in the back if you choose just chug everything in there no problem haha

Overall is a great case best bang for the buck.

I will be looking forward to make some mods stay tuned. 😊

::::::::::::::::::::

Did you like the BGM? Check them out in the link below tons of Royalty Free Music provided by:
Music: Sweet by LiQWYD is licensed under a Creative Commons License. https://creativecommons.org/licenses/... / liqwyd
Support by RFM - NCM: https://bit.ly/2xGHypM

::::::::::::::::::::

Subscribe: / @double_y