DIY ESPHome Controlpad - part 2

DIY ESPHome Controlpad - part 2

#ad Thanks to PCBWay for making my beautiful design possible !! (https://www.pcbway.com)

This is a project I wanted to do for a very long time but did not had the balls to start, so I finally took a big breath and manned up. We are making a controlpad with key switches, rotary encoder and a display and connect it all to Home Assistant. This project will be big so it will not fit in one video. Also I want to be able to get input and change things as we go.
hope you like the video, if you do pls like and subscribe or support me on patreon so i can continue in making these video's.

In part two we are designing and printing the case, the pcb manufactured by PCBWay came in so we are soldering the parts together and do the assembly
Parts used:
Cherry MX key switch: https://amzn.to/3YzUr0b
Keycaps: https://s.click.aliexpress.com/e/_DCj...
Rotary encoder: https://s.click.aliexpress.com/e/_DDR...
SSD1306 Display: https://s.click.aliexpress.com/e/_Dmp...
Expansion Board: https://s.click.aliexpress.com/e/_DEk...
ESP32-CH340C-TYPEC: https://s.click.aliexpress.com/e/_DEk...
Breadboard: https://s.click.aliexpress.com/e/_DBK...

Equipment:
BIQU Buildplate: https://biqu.equipment/collections/fo...

Support me:
Patreon:   / lickylauda  
Paypal: https://paypal.me/lickylauda
Buy me a coffee: https://www.buymeacoffee.com/lickylauda

If you want to support me in any other way, please reach out to me by mail.
I am always looking to review new products and am still looking for a filament sponsor.

#PCBWay

Chapters:
0:00 intro
0:11 sponsor
0:15 Designing the case
1:19 Printing the case
2:05 sponsor
2:21 design choices
5:15 mistake in design
6:04 soldering
9:14 test and assembly
11:14 satisfying clicks
11:51 patrons
11:57 credits