Lexus IS250/IS350/IS200T/IS300H Dynamic Tail Lights (2014-2020) - Get that high-end light bar look!

Our three-piece tail light assembly is a must-have upgrade for your third-generation Lexus IS - dramatically changing the appearance of your car with a stunning, full-width dynamic light bar spanning across the rear alongside sequential indicator functionality and super bright brake/reverse LEDs.

Providing you with a similar aesthetic look to the current facelifted IS model and with an incredibly easy plug-and-play install process, these tail lights are a necessity for any IS owner looking to update their car!

⚡️ Get yours now: https://bit.ly/44jTRUx

💫 Start-up animation
🔦 Full width red LED light bar
🛑 Powerful red LED tail/brake lights and white LED reverse lights
🍊 Bright sequential amber LED turn signals
🔌 Plug & play
💻 No coding required
❌ No errors
⬅️ Fully reversible to OEM

Chapters -
00:00 - Introduction
00:17 - Product Overview
00:58 - Step 1: Upper boot trim removal
01:13 - Step 2: Inner tail lights removal - bolts and plugs
01:32 - Step 3: Inner tail lights removal - push out lights
01:44 - Step 4: Numberplate light garnish removal
02:01 - Step 5: Boot garnish removal - bolts
02:14 - Step 6: Boot garnish removal - clips
02:33 - Step 7: Disconnect reverse camera plugs
03:00 - Step 8: Reverse camera bracket removal
03:22 - Step 9: Disconnect reverse camera plug from bracket
03:38 - Step 10: Reverse camera removal from bracket
03:51 - Step 11: Reinstall camera on new bracket
04:23 - Step 12: Reinstall screw on new bracket
04:37 - Step 13: Reconnect reverse camera harness plug
04:42 - Step 14: Reinstall reverse camera bracket
04:55 - Step 15: Reconnect reverse camera plugs
05:02 - Step 16: Install tail light centre section
05:26 - Step 17: Align tail light studs with boot holes
05:37 - Step 18: Reinstall nuts to tail light centre section
05:52 - Step 19: Reinstall bolts to boot garnish section
05:59 - Step 20: Install new numberplate light garnish
06:15 - Step 21: Connect centre section to harness
06:28 - Step 22: Connect centre section bridging cables
06:34 - Step 23: Secure bridging cables
06:45 - Step 24: Remove boot hinge cover
07:02 - Step 25: Partially remove inner boot trim
07:23 - Step 26: Disconnect harness plug
07:31 - Step 27: Remove bolts and bolt cover
07:47 - Step 28: Outer tail light removal
08:00 - Step 29: Remove harness and grommet
08:14 - Step 30: Install outer tail light section
08:33 - Step 31: Reinstall bolts and bolt cover
08:49 - Step 32: Reconnect harness plug
08:56 - Step 33: Connect outer tails to inner tail section
09:11 - Step 34: Secure bridging harness
09:18 - Step 35: Connect bridging harness to outer tails
09:24 - Step 36: Reinstall inner boot trim
09:32 - Step 37: Reinstall boot hinge cover
09:47 - Step 38: Reinstall upper boot trim
09:59 - Showcase

iilumo | High Performance Automotive Lighting & Accessories
⚡️ www.iilumo.com
🪄 www.iilumolab.com
📞 1800 003 888
📍 22 Atlantic Drive, Keysborough, VIC 3173

Music from #InAudio: https://inaudio.org/
MokkaMusic - Sunset Boulevard