Design AND Print your own PRINT IN PLACE - Feat. Creality K1

The secrets to successfully printing a Print in place model (PIP) revealed!

Thank you again to my long-time supporters of the channel on Patreon. If you're interested in supporting the channel, I'll be posting behind the scenes videos there starting next week as well as interacting directly if you have video content ideas or questions or ideas of any kind. Here is the link to join!

Support this channel:
  / needitmakeit  

In this video we'll have a look at some successful PIP models from Printables.com and then use those techniques to design our own to print on the Creality K1 Printer.

Lots of people have had problems with printing these kinds of models, and I have as well. There are so many settings on a printer which impact the final product, there are also design details that impact the parts quite a bit as well. We'll review the most important parts of both to come up with a design that will print well even on poorly tuned 3d Printers.

The model we design is a fairly simple hinge which fixes a common problem on the Coleman Coolers. The hinge requires no supports, it has proper bridging, nice clearances, and it is free as soon as it is removed from the buildplate.

As mentioned in video:
https://www.printables.com/model/6053...

Geared Hinge:
https://www.printables.com/model/1207...

Cable Winder:
https://www.printables.com/model/5642...

If you're interested in checking out Bambu / Creality Printers and filament, here is my affiliate link (a small portion of any sales helps fund future videos):

BAMBU PRINTERS
https://shrsl.com/4aghz

CREALITY PRINTERS
https://shrsl.com/4aghy

CREALITY HYPER PLA
https://shrsl.com/4aghn

Link to hinge STL file:
https://www.patreon.com/user/shop/pri...

If you are struggling with problems and you need help, send me an email or write in the comments.

#ender3
#bambu
#3dprinting