Скачать или смотреть Велостанок Wahoo Kickr SNAP 2: Обзор. Распаковка. Установка.

WHAT’S IN THE BOX:
KICKR SNAP
Front wheel block
Power cord
Power brick
Quick-release skewer
Quickstart guide

Wahoo SNAP 2 has LED lights to as a visual confirmation that KICKR SNAP is powered, connected and transmitting via Bluetooth Smart and/or ANT+

CALIBRATION
THIS IS AN IMPORTANT STEP. You might need to do this a couple of times until you get the right calibration. You want to aim for a spin down number between 9-16 seconds.

Tighten the roller against the bike’s tire to prevent tire slip. To set the correct roller tension against the tire, use your hand to hold the flywheel stationary and attempt to rotate the bicycle wheel with your other hand. Wahoo recommends 2 full turns.
Ride for about 10 minutes before you perform the spindown.
Aim for a spindown between 9-16 seconds. If your spindown number is less than 9 seconds, you will need to loosen the tension. If more than 16 seconds, you will need to increase the tension. Add another 1/4 turn and do another spindown. The calibration can be done within Wahoo’s mobile app, TrainerRoad, Zwift, or your bike computer.

If you want to perform the calibration in Zwift:

Make sure the trainer is paired as the power source
Ride the trainer for at least 10 minutes
Go back to the pair device screen (keyboard shortcut A)
Click on the little gear icon next to the Wahoo SNAP

The KICKR SNAP comes with a heavy 10.5lbs flywheel that will give you a super smooth real world inertia.