Скачать или смотреть How to Update Firmware on Your Geeboon Solder Station (HA310 / TA305 / HC24 / TC22)

How to Update Firmware on Your Geeboon Solder Station (HA310 / TA305 / HC24 / TC22)

I couldn’t find this anywhere on YouTube, and after finally finding the guide on Reddit, I figured it would help others to have it here too.

Instructions by u/Gazz_292 on Reddit. Full credit to them.

Original Reddit thread:
  / how_to_update_your_geeboon_solder_station_...  

Official Firmware Links (from Geeboon)
For TC22 / HC24:
https://drive.google.com/drive/folder...
For TA305 / HA310:
https://drive.google.com/drive/folder...
Latest: TC22/HC24 → v1.27 | TA305/HA310 → v1.21

---

Navigating the Menus

HA310 / TA305:
• 4 front buttons. Long-press MENU to open settings.
• Use ▲▼ to navigate, MENU to confirm.
• Firmware version: MENU → About.
• USB-C port is on the BACK of the station.

HC24 / TC22:
• One rotary knob (turn + press).
• Long-press knob to enter menu, rotate to scroll.
• Firmware version: Menu → About.
• USB-C port is on the FRONT.

---

Firmware Update Steps

1. Check version: Menu → About (AppVER = firmware).
2. Download and unzip the correct firmware.
3. Connect station to PC with a USB-C DATA cable.
Back port = HA310 / TA305
Front port = HC24 / TC22
4. The screen shows “UPDATA” or “USB ON.” PC shows “GEEBOON-MSD.”
5. Copy the .bin file (e.g., TA305_HA310_1.21.bin) onto that drive.
6. Wait until it says “UPDATA SUCCESS! Please unplug USB.”
7. Unplug USB; the station reboots automatically.
8. Confirm the new version under Menu → About.

---

Tips
• Use a good data cable (not charge-only).
• Don’t power off during flashing.
• If it fails, retry with another USB port or cable.
• You can update with or without mains power.

---

Disclaimer
This is a community-shared process. Proceed at your own risk.
Always confirm you have the right model and firmware.

Credits
Written guide by u/Gazz_292 (Reddit | r/soldering)

#Geeboon #HA310 #HC24 #TA305 #TC22 #FirmwareUpdate #SolderStation #DIY #ElectronicsRepair