Carbon Fiber Delamination Bubble Clear Coat Repair - Lexus RCF Vehicle Door/Window Button Panel DIY

The carbon fiber door switch trim panel cover on my Lexus RCF delaminated. This resulted in large ugly discolored air bubbles under the epoxy or clear coat. Instead of purchasing brand new parts, which would have cost a few hundred dollars, I attempted a DIY fix. In case the repair did not work, I could always simply buy entirely new parts. After removing the original epoxy (or clear coat), I wet sanded and applied a new clear coat. See link to 4K clear coat purchased from Amazon below. Finally, I polished the parts to a glossy finish. The result was gorgeous and required less than one hour of effort. The same repair method could be applied to other car parts, including interior and exterior trim, panels, and hood. I hope this helps you with your project!

2K clearcoat:
https://amzn.to/3OVwlqV

Automotive sandpaper assortment on Amazon:
https://amzn.to/3OYDYNA

Isopropyl alcohol for cleaning on Amazon:
https://amzn.to/49rUePj

P100 Respirator Filter Cartridges on Amazon:
https://amzn.to/48GnDUL

Half face respirator on Amazon:
https://amzn.to/3P88tke

Safety goggles on Amazon:
https://amzn.to/4a0PErb

Attach phone holder to windshield with magnet (NEOS):
https://amzn.to/3yMJfCs