Скачать или смотреть Camon 30s Pro Stuck On Logo | Tecno Cla6 Flash Without Pc ✅

If your Camon 30s Pro is stuck on the logo screen, here are several troubleshooting steps you can try to resolve the issue:

1. Force Restart the Phone

Sometimes, a simple restart can resolve the issue if the phone is frozen.

To force restart: Hold down the Power button and the Volume Down button simultaneously for about 10–15 seconds, until the device powers off and restarts.


2. Boot into Safe Mode

Booting in safe mode can help identify if a third-party app is causing the problem.

To enter Safe Mode:

Power off your phone.

Turn it back on and, as soon as the logo appears, press and hold the Volume Down button until the device finishes booting.

If the phone starts normally in safe mode, an app you installed recently might be causing the issue.



3. Wipe Cache Partition

Corrupted system files in the cache can sometimes cause boot issues.

To wipe the cache partition:

Power off the device.

Press and hold Volume Up + Power button simultaneously until the phone logo appears.

Navigate using the volume buttons to select "Wipe cache partition" and confirm with the Power button.

After the process finishes, reboot the phone.



4. Factory Reset (via Recovery Mode)

If the phone is still stuck, a factory reset might be required. Be aware this will erase all data on the device.

To perform a factory reset:

Power off the phone.

Press and hold Volume Up + Power button simultaneously to enter recovery mode.

Navigate to Wipe data/factory reset using the volume buttons, and confirm with the Power button.

Select Yes to confirm and reset the device.



5. Check for Software Issues (Reflash Firmware)

If none of the above methods work, the issue may be due to a corrupt system file or a failed software update.

Reflashing firmware can fix this, but it's a more advanced option and typically requires downloading the official firmware for your device and using a tool like SP Flash Tool to re-install the software. Be sure to follow an official guide or seek professional help if you aren’t comfortable with this process.


6. Seek Professional Help

If you’ve tried all the steps above and the phone is still stuck on the logo, it might be a hardware issue or a more severe software problem. Contact the manufacturer's support or visit an authorized service center for a professional diagnosis.

Let me know if you need detailed steps for any of these methods!