The Best Beginner DIY RC Airplane

Описание к видео The Best Beginner DIY RC Airplane

This is a 60" (1.5m) foam built Timber. I was inspired to recreate the Timber from foam in a large scale. This plane flies so well, its so stable and handled huge gusts and lots of wind on its maiden. The UMX Timber is the best beginner plane, and is a plane I have had for years - it's my go-to. Now, this large foam Timber is my go-to and I would say its as reliable and would be awesome for a beginner as well!! Thanks to Jeff from Las Vegas Flying Club for flying it with me on the maiden flight.

If you like videos like this, consider buying me a coffee, it really supports me: https://www.buymeacoffee.com/troymcmi...

Watch how to customize this airplane without spending lots of money and time:
   • The BEST way to paint your DIY airplane  

Here are the plans: https://www.dropbox.com/s/31m7bdeitri...

Thanks so much for watching.

See what else I am working on:   / troymcmillan_rc  
  / troymcmillan_rc  

#DIY,#RCairplane,#Foam
Everything I used:
20x30 3/16" Waterproof Foam Board: https://amzn.to/3hnmyHn
Motor 2832 Brushless: https://amzn.to/3gl3bgL
10x4.5 Propeller: https://amzn.to/2FRyAuX
Prop adapter: https://amzn.to/2YmXVmT
Esc 30amp: https://amzn.to/3gl3bgL
6x 9g servos: https://amzn.to/31kj82B
Receiver ar620: https://amzn.to/3j4PbK4
Y-Harness: https://amzn.to/2YrYjAl
Assortment of 3-Pin Extension Cables: https://amzn.to/3l1xNYt
3S 2200mha Batteries: https://amzn.to/3l6vCTf
Spektrum DX6 Controller: https://amzn.to/3l6NFsD
3D Printer: https://amzn.to/3hn5cdN
Flexible PLA: https://amzn.to/34mA4rd

You’ll also need:
2x 4.25in Wheels: https://amzn.to/3ldv5yT
1.5 in tail wheel: https://amzn.to/3ldv5yT
1mm Push Rod Wire: Purchase this at your local hardware or hobby store, I used solid steel "music" wire
2mm wire for landing gear: Same as above, hardware or hobby store
Z-Bend pliers: https://amzn.to/34mA0rt
Hot glue gun: https://amzn.to/31kHNnG

HIGHLY RECOMMENDED BEGINNER PLANE
1.5m Timber: https://amzn.to/32l6iQW
UMX Timber: https://www.horizonhobby.com/product/...

I used my UMX Timber to scale up to size. Modeled after 1.5m Timber.












Disclaimer: I am not sponsored by any of the products I mention. Some of the above links are affiliate links, that does not effect the price you pay for a product, but I may receive a small commission if you make a purchase. This helps support my channel and allows me to continue to make videos like this. Thank you for your support!

Комментарии

Информация по комментариям в разработке