Скачать или смотреть #howto

To replace the DPF (Diesel Particulate Filter) on a Ford Transit, follow these general steps:

1. Make sure the vehicle is on a flat, stable surface and the engine is cool.
2. Lift the front of the vehicle using an appropriate jack and secure it with jack stands.
3. Locate the DPF, which is typically positioned underneath the vehicle, near the exhaust system.
4. Inspect the DPF and its connections for any damage or leaks. If necessary, disconnect any electrical or sensor connections.
5. Use appropriate tools to remove the mounting bolts/clamps holding the DPF in place. Take note of the exact position and orientation of the DPF during removal.
6. Carefully lower the DPF from its position, taking care not to damage any surrounding components or sensors.
7. Before installing the new DPF, compare it with the old one to ensure they are identical in size, shape, and connection points.
8. Attach the new DPF, aligning it correctly according to the reference points noted during removal.
9. Secure the DPF with the mounting bolts/clamps, tightening them to the specified torque values.
10. Reconnect any electrical or sensor connections that were disconnected earlier.
11. Double-check all connections, ensuring they are secure and properly aligned.
12. Lower the vehicle from the jack stands and ensure it is stable on the ground.
13. Start the engine and check for any abnormal noises or exhaust leaks. Monitor the DPF performance and regeneration process.
14. Take the vehicle for a test drive to ensure everything is functioning properly.
15. It's recommended to consult the vehicle's service manual or reach out to a qualified mechanic for detailed instructions specific to your Ford Transit model.

Note: It is crucial to comply with local emissions regulations and dispose of the old DPF in an environmentally friendly manner.