Скачать или смотреть AOS Falcon 7 - Long Range Mountain Cruising FPV - 10'000 mAh Li-ion

0:00 Take off
0:45 GPS Rescue Test
0:53 Crossing the Valley (Valsassina)
3:33 Start of the Climb
7:09 First Mountain Top
8:50 Pan Around
10:45 Peak altitude, near Grigna Mountain
12:25 Maximum distance from Home 5.6Km
12:50 Descent
14:55 Crossing the Valley
17:26 Landing Approach

In this video I take a tour of 16 Km, 19 minutes flight time, with the 6s2p 21700-50G 10'000 mAh Samsung Li-ion battery pack. I used 5.000mah in the flight, which means I could have made this trip twice with the same battery. Like a noob, I forgot to set the crossfire tx module power output to the proper value (usually 2 Watts), so I made all this flight at just 10 mw, which is the setting I keep it when I work on the bench. During the flight I got dangerously low on the LQ, even less then 50%, so I almost failsafed at 5.6Km, but it worked out fine. I managed to save it by setting the TBS shapeshifter antenna to directional (I usually keep it in omni mode) and pointing the antenna straight at the drone. ALWAYS CHECK THE CROSSFIRE AND DJI POWER OUTPUT BEFORE A FLIGHT !!!.

Video footage is from a Gopro Hero 6 with firmware 1.6, settings 4k 4:3 4000x3000 30 fps, wide FOV, protune On, ISO min/max 100/400, Shutter auto, Gopro color, medium Sharpness, Mic Wind. The GoPro video segments were joined with Reelsteady joiner: https://github.com/rubegartor/ReelSte...
and then smoothed with Reelsteady GO ( https://www.reelsteady.com/pages/go-d... ), Smoothness 2 ticks to the left from the center, pan speed all the way to the right The video overlay was made using Dashware. Credits to Drone racing Hungary ( https://droneracehungary.hu/dji-srt-t... ) and Snappy FPV (    • Tutorial: OpenTX Logs in Dashware | Teleme...  ) for their tools. See my tutorial video on how to make this overlay:    • Dahsware - How to integrate DJI SRT &  Tel...  

Images of my gear and stuff : https://onedrive.live.com/?id=4E7DDD4...

Antennas used on goggles:
2x prodrone.pl helical 12 turn 14 db ( https://shop.prodrone.pl/pl/p/PRO-Hel... )
2x Mike Malagoli 6-turn helicals custom made & tuned for the 2nd channel of the dji goggles ( https://ko-fi.com/s/25395edd9f )
Images of my gear (goggles, drone, radio) : https://onedrive.live.com/?id=4E7DDD4...

Frame: AOS Falcon 7" (https://www.cncdrones.com/falcon-7-ci... ).

All up weight in this test was 1.622 grams.

Motors: 4x Racerstar AirA 2508 BP 1.200kv long range. They are decent for their price, but definitly undersized for this build. You need 2806.5 or 2810 motors to properly drive 1.600 grams of drone. I'll see what i can do next time.

Props: HQProp 7040x3 ( https://www.hqprop.com/hq-durable-pro... )
ESC : Rush Blade Super 60A 48Hz ( https://it.aliexpress.com/item/100500... )
FC : Mamba F722S blutooth ( https://www.diatone.us/products/mamba... )

Battery: 6s Li-On 6s2p 10.000Mah, 21700 Samsung INR-50G cells ( https://www.farinsframes.com/6s-10000... )

BN-220 GPS ( https://it.banggood.com/Beitian-Dual-... ).

Radio: Radiomaster TX16S ( https://it.banggood.com/RadioMaster-T... )

JR Module: TBS Crossfire TX lite ( https://www.team-blacksheep.com/produ... )

Radio antenna: TBS shapeshifter ( https://www.team-blacksheep.com/produ... ) , set in vertical position to cope with the bardpole

Receiver: TBS crossfire nano rx ( https://www.team-blacksheep.com/produ... ) set at 8CH. Dynamic power set to off, because i want it to always work at the output power that i select in the radio.

RC Link antennas: 1 x Truerc planar bazooka dipole 868mhz antennas vertically placed at the rear at 20° degrees ( https://www.truerc.ca/shop/linear-ant... )

Video antennas: 2x tbs triumph pro (long range) ( https://www.team-blacksheep.com/produ... ).

Dji unit settings: 1.200mw, 50 mbit, High Quality, 16/9 aspect ratio, autofocus off, power control on

Betaflight main settings : (4.2.9 firmware)
Thrust_linear = 25
Pidsum_limit = 1000
Pidsum_limit_yaw = 1000

PIDs
Roll 67 95 57 45
Pitch 74 100 62 48
Yaw 72 95 0 45
Feedforward 1.0

Filters
Gyro: Only lowpass filter 1, set at 150hz PT1

RPM filters: 3 / 85
Dynamic notch filters : 0 250 100 400

D-term:
Cutoff lowpass 1 : 85hz / biquad, all the rest turned off
Yaw lowpass cutoff : 80hz


ESC settings: PWM 48 Hz, timings 23