Tenere 700 Clutch plate change - CP2, MT-07

After four and a half year and 70.000 km I change the clutch plates on my Tenere 700. This is the video of the work I did and hope it can help someone looking to do the same.
The service manual is not very detailed in some areas so I looked at forums and videos to gather as much info I could before starting.
Since the CP2 engine is the same as on the Yamaha MT-07 there is a lot of information online to look at.

These are the parts I bought for this job.
Friction plates
https://www.off-the-road.de/en/tenere...
Steel plates
https://www.off-the-road.de/en/tenere...
Gasket
https://www.off-the-road.de/en/tenere...
Springs
https://www.off-the-road.de/en/tenere...

------------
Support us on Patreon!
  / nomadsweden  
------------
LINKS
Find links to the things I use here https://linktr.ee/nomadsweden
------------
Music from
https://artlist.io/Robert-351707
------------
Check out our t-shirts: https://nomadsweden.myspreadshop.se/