Скачать или смотреть CCIE Enterprise Infrastructure - EIGRP Metric Weights / K Values

In this video, we'll look at EIGRP metric weights and configure the K values.

0:00 Introduction
0:25 Topology and previous configuration
1:13 Configuration examples
2:00 ‘metric weights’ command syntax
2:21 Usage Guidelines
4:14 EIGRP metric calculation
6:34 K values must match
7:10 ToS value
7:57 Different K values for classic and named mode
8:26 Configuration on R1 (classic mode)
9:42 K values on Wireshark (R1)
11:35 Shutdown EIGRP process on R2
12:02 Back to R1
12:31 ToS value is 0
13:36 Configuration on R4 (named mode)
15:38 K value mismatch
16:44 Wireshark packet capture on R4
17:20 Fix the K values
17:51 ToS value does not affect EIGRP neighbor adjacency
18:15 Final configurations
18:59 Ending

FINAL CONFIGURATION

Classic Mode
---
router eigrp 12
network 192.168.255.0
metric weights 0 5 4 3 2 1

Named Mode
---
router eigrp HEDWIG
address-family ipv4 autonomous-system 12
network 192.168.255.0
metric weights 0 5 4 3 2 1 0

IP Routing - EIGRP Configuration Guide: https://www.cisco.com/c/en/us/td/docs...

Master Command List ('metric weights'): https://www.cisco.com/c/en/us/td/docs...

Thank you for watching!

LIKE 👍🏼 and SUBSCRIBE ❤️

Follow on Twitter:   / dotonebit  

***

If you want to support the channel in other ways, donations are appreciated (but not required). If you wish to leave a donation, you can go to PayPal: https://paypal.me/NetworkPlayroom