Moldmaking With Clear Silicone Rubber

When a project requires a complex parting line, it is often easier to pour the entire mold in one process with clear rubber, then cut your parting line. This process also saves at least a day in creating the mold.

00:00 - Introduction to Clear Silicone Rubber Moldmaking
01:02 - Constructing The Mold
01:23 - Preparing The Model
02:37 - Mixing & Pouing Elkem V-3040 Clear Silicone
03:58 - Demolding The Clear Silicone Mold
04:50 - Cutting The Parting Line
06:03 - Casting Our Part
07:30 - Demolding Our Part

This is an updated version of an earlier the video also entitled Moldmaking With Clear Silicone Rubber. We’ve gone back to increase the resolution, correct the color; plus update the graphics and add some clarifying content.

Freeman Mfg & Supply is a materials supplier. The thousands of hours dedicated to producing this series was done in service to our industry. If you are looking for any of the materials shown, please visit us at http://freemansupply.com (our primary website for professionals) or http://miapoxy.com (curated for the DIY market).

Finally, this video was originally part of a compilation DVD entitled Making Parts, Patterns, Tools, & Molds. You can see all of those videos (in sequence and in context) on our dedicated video website at https://www.FreemanVideos.com. Or check out our YouTube Playlists. Or find your next video of interest here:

Moldmaking & Casting Videos:

1 - Using Rigid Fast-Cast Urethanes for Casting Both Molds & Parts
   • Using Rigid Fast-Cast Urethanes for C...  
2 - Making Flexible Molds with Urethane Rubber
   • Making Flexible Molds with Urethane R...  
3 - Simple Silicone Rubber Molds (Without a Parting Line)
   • Simple Silicone Rubber Molds (Without...  
4 - Two-Part Silicone Rubber Molds (Forming a Straight Parting Line)
   • Two-Part Silicone Rubber Molds (Formi...  
5 - Moldmaking With Clear Silicone Rubber
   • Moldmaking With Clear Silicone Rubber  
6 - Making Molds & Casting Thin Walled Parts (& Using Color Tints)
   • Making Molds & Casting Thin Walled Pa...  
7 - Making Two-Part Silicone Rubber Molds with Complex Parting Lines
https://tinyurl.com/spf9z8hs
8 - Tips & Tricks for Moldmaking & Casting Parts with Intricate Detail
   • Tips & Tricks for Moldmaking & Castin...  
9 - Making Simple Multi-Cavity Molds
   • Making Simple Multi-Cavity Molds  
10 - Surface Casting Method #1 (featuring Gap Wax)
   • Surface Casting Method #1 (featuring ...  
11 - Surface Casting Method #2 (With Brushable Urethane Casting Resin)
   • Surface Casting Method #2 (With Brush...  
12 - Using Fillers & Pourable Foam to Lighten a Casting (& More)
https://tinyurl.com/2cav5em5


Laminate Toolmaking & Composite Parts Videos:

1 - Laminating with Fiberglass & Epoxy - The Basics
   • Laminating with Fiberglass & Epoxy - ...  
2 - Building a Fiberglass & Epoxy Laminate Mold
   • Building a Fiberglass & Epoxy Laminat...  
3 - Vacuum Bagging a Carbon Fiber/Composite Part
https://tinyurl.com/auf6d2d8
4 - Building a Laminate Tool with Epoxy Paste
   • Building a Laminate Tool with Epoxy P...  
5 - Rapid Tool Making with the Repro Laminating System
   • Rapid Tool Making with the Repro Lami...  
6 - Making a Simple Glove Mold
   • Making a Simple Glove Mold  

Preparing Models, Molds, & Materials Videos:

1 - Prevent Your Castings & Models From Sticking to Your Molds
   • Prevent Your Castings & Models From S...  
2 - Weighing & Mixing Resins & Silicone Rubber The Right Way
   • Weighing & Mixing Resins & Silicone R...  
3 - Eliminate Entrapped Air in Molds & Castings
   • Eliminate Entrapped Air in Molds & Ca...  
4 - How NOT to Ruin Silicone Rubber When Making Molds
https://tinyurl.com/32uwjv3z