EZ Peel Hard Surface Transfer Paper | DigitalHeat FX

Find our Hard Surface Paper and Accessories here: https://colmanandcompany.com/EZ_Peel_...

This is how you customize hard surfaces like Wood, Metal, Mugs and more

How to apply OKI 8432 DigiitalHeat FX transfers to mugs:
1. Download complete instructions from https://colmanandcompany.com/DFX_Pape...
2. Heat Mug Press to 265 degrees and set for normal pressure
3. Apply transfer to mug using heat tape
4. Place mug into mug heat press for 180 seconds
5. When the time has elapsed, carefully remove the mug from the heat press and place it in a safe place to completely cool down. Always peel the transfer paper cold. If you peel the transfer paper while the mug is still warm, you will experience toner loss and the transfer paper won’t fully peel off the mug.

Finishing Process:
1. Ensure your oven is preheated to 375°F. You will not be using your heat press for the finishing step when using the EZ Peel Hard Surface transfer paper.
2. When your oven is preheated, carefully place the substrate in the oven. Bake/finish the substrate in the oven for half the time you used in the transfer step.


Other items you can press would be:
Wood - Metal - Glass - Mirrors - Tiles - Coasters - etc

Watch this demonstration on the Oki pro8432 White Toner Printer:    • OKI pro8432WT White Toner Printer | C...  

To learn more about the Oki pro8432, watch this video:    • OKI pro9541 White Toner Printer | How...