How to Remove, Replace & Fix Cruise Control Switch or Fuse on 2005 2006 2007 2008 Toyota Matrix Vibe

How to Remove, Replace & Fix Cruise Control Switch or Fuse on 2005 2006 2007 2008 Toyota Matrix or Pontiac Vibe

Tools Needed :-
1- T-30 Torx bit
2- Philips Screw Driver


Steps for Cruise Control Switch removal :-
1- Remove the T-30 Two screws from the right and left side of Steering wheel to remove the airbag.
2- Move Airbag to the left side carefully to get to the two screws holding the Cruise Control Switch on the steering wheel.
3- Unhook the harness holding the Cruise Control on to the Steering Column
4- Unhook the Ground White wire holding on to the Steering Column
5- Remove Cruise Control switch by sliding it to the left slowly and pulling it out at the same time.

Steps to fix Cruise Control replacement :-
1- Unscrew the one single screw holding the Cruise Control Switch cover by the ON/OFF switch from underneath as shown in Video
2- Get a replacement cruise control switch or fix Broken/Bend parts

Steps to Replace Cruise Control Fuse:-
1- Inspect all fuses mentioned in the Video
2- Replace any blown fuse and retry your Cruise Control again