FOX 34 Performance Elite FIT 4 2018 Fork Damper air spring + 50 hour service guide for beginners

This is a step by step full service guide video for a 2021 FOX Performance Elite 34 Float FIT 4 Fork.

The video is a bit lengthy, my apologies for this, but my goal is to make this guide as easy as possible to follow for those all around the world who might be intimidated by performing this service.

The fork in this video is a 2018 version. Make sure to verify the damper version by year on your fork in order to unsure you purchase the appropriate damper service kit.

As always, If you have any questions, feel free to leave them in the comments section below, and I will answer them the first chance I get.

Below are part numbers for some FOX specific tools that can make this job easier. You DON'T need to buy the fox versions. You can buy aftermarket versions that will cost you much less and work the same. Search the fox part numbers in google, and I'm sure you will see results for alternative options on eBay and other sites

803-00-276 Service Kit: Hand Bleed, Syringe and Tube, 2010 32 Fit RL-RLC Cartridge - (Buy this)
398-00-371 Sealhead To Shaft Bullet, 10mm
398-00-657 Bullet, Sealhead To Shaft, FLOAT NA 2
398-00-681 Damper-side and ALL 32-34-36-40 Spring-side Removal Tool
398-00-682 Damper-side Removal Tool
398-00-702 Fork Topcap Socket, 26mm, 3/8 Drive
803-00-147 Kit Shaft Clamps, 07 FORX, Set #2 (32 X Body, 36, 40 Forx) (For 8mm Shafts)
803-00-830 Shaft Clamps (For 10mm Shafts)
803-01-324 Kit Clamps, Grip Damper, Body and Shaft


Chapters
00:00 Intro
02:27 Tools needed
12:04 50 hour service Part 1 lower removal
29:30 Air spring service
52:57 Damper service Upper
01:28:03 Damper service lower
01:56:51 50 hour service part 2 Assembly