How to Replace Front Strut 2009-2013 Honda Fit

Buy Now!
New Strut & Spring Assembly from 1AAuto.com https://trq.video/ia-1ASTS01645

This video shows you how to install front struts on your 2009-2013 Honda Fit. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

This repair was done on a 2010 Honda Fit Sport 1.5L Hatchback 4-Door FWD Manual and the process should be similar on the following vehicles:
2009 Honda Fit
2010 Honda Fit
2011 Honda Fit
2012 Honda Fit
2013 Honda Fit
2014 Honda Fit

Tools you will need:
• 17mm Wrench https://trq.video/oy-1AXAA00010
• 19mm Wrench https://trq.video/oy-1AXAA00010
• 12mm Socket https://trq.video/oab-1AXAA00015
• 17mm Socket https://trq.video/oab-1AXAA00015
• 18mm Socket
• 19mm Socket
• Locking Pliers https://trq.video/ok-1AXAA00139
• 1/2 Inch Impact Gun https://trq.video/oh-1AXAA00252
• Torque Wrench https://trq.video/o3-1AXAA00044
• 6mm Hex Socket

Subscribe:    / @trq  

Check out our playlist:
Honda Fit 2009-2014 2nd Generation:    • Honda Fit 2009-2014 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.